Everything you need to know about Steering Bar for Ninebot Mini...
DISASSEMBLING & ASSEMBLING THE KNEE BAR
Follow the pictures and remove the steering cover first and then remove knee bar assembly with hand.
Loosen the quick release and then remove the knee bar assembly
DISASSEMBLING THE KNEE CONTROL STEERING ASSEMBLY
Use Allen wrench _4mm to remove the two M5*16 screws, the knee control steering can be disassembled.
REMOVAL OF FOAM KNEE PADS
Use Allen wrench_2.5mm to remove the M4*8 six screws for disassembling the left and right foam pads of knee bar.
SOURCE & THANKS : vladimir Sokolov @ https://vk.com/ninebot_run
" POIGNÉES "(QUI NE SONT PAS À UTILISER COMME DES POIGNÉES)
proof with the Mini Pro version that does not offer a similar ergonomics.
You really take it by the handle, with the risk of
- Tear the foam
- Break the hard plastic bonded to the metal part that are the backbone of the "handle"
Handles and control bar
The handles are the handles, a frame composed of the metal part connecting it to the control bar, and hard plastic
Compare with the Mini Pro
I advise to grasp the bar